3M Cold Shrink QT-III 7620-T and 7690-T Series Kits contain one-piece, non-skirted, silicone rubber terminations, for indoor and weather-protected applications. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, comfortable Hi-K stress controlling compound and built-in silicone top seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and loaded onto a removable recyclable core. The kits are designed for terminating solid dielectric shielded power cable rated 5 kV through 25/28 kV, with Tape Shielded, Wire Shielded and UniShield constructions.

Meets requirements of IEEE Standard 48-1996 for Class 1 Terminations. Each Kit makes three single-phase terminations.

3M Cold Shrink QT-III 7640-T and 7650-T Series Kits contain one-piece, non-skirted, silicone rubber terminations, for indoor and weather-protected. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, comfortable Hi-K stress controlling compound and built-in silicone top seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and loaded onto a a removable recyclable core. The kits are designed for terminating Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) power cables rated 5 kV through 25/28 kV.

Meets requirements of IEEE Standard 48-1996 for Class 1 terminations. Each kit makes one single-phase termination.

3M Cold Shrink QT-III 7640-T-HSG and 7650-T-HSG Series Kits are designed for applications requiring a high ampacity ground. Each kit contains a one-piece, non-skirted, silicone rubber termination with high-ampacity ground assembly., for indoor and weather-protected applications. The termination assembly consists of a tubular insulator, high-dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound and built-in silicone top seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and load onto a removable recyclable core. The kits are designed for terminating solid dielectric shielded power cable rated 5 kV through 25/28 kV, with Tape Shielded, Wire Over Tape Shielded and LC Shielded constructions.

Meets requirements of IEEE Standard 48-1996 for Class 1 Terminations. Each kit makes one single-phase terminations.

3M Cold Shrink QT-III 7620-S, 7690-S and 7680-S Series Kits contain one-piece, skirted, silicone rubber terminations, for outdoor weather-exposed applications. The termination assemblies consist of a skirted insulator, high-dielectric constant (Hi-K) stress control tube*, conformable Hi-K stress controlling compound and built-in silicone top seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and loaded onto a removable recyclable sore. The kits are designed for terminating solid dielectric shielded power cables rated 5 kV through 35 kV, with Tape Shielded, Wire Shielded and UniShield constructions.

Meets requirement of IEEE Standard 48-1996 for Class 1 terminations. Each kit makes one single-phase termination.

*NOTE: 7620-S and 7621-S are designed and assembled with stress controlling compound only.

3M Cold Shrink QT-III 7640-S, 7650-S and 7660-S Series Kits contain one-piece, skirted, silicone rubber terminations, for outdoor weather-exposed applications. The termination assemblies consist of a skirted insulator, high-dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound and built-in silicone tip seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and loaded onto a removable recyclable core. The kits are designed for terminating Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) power cables rated 5 kV through 35 kV.

Meets requirements of IEEE Standard 48-1996 for Class 1 Terminations. Each kit makes one single-phase termination.

 3M Cold Shrink QT-III 7650-S-HSG and 7660-S-HSG Series Kits are designed for applications requiring a high ampacity ground. Each kit contains a one-piece, skirted, silicone rubber termination with high ampacity ground assembly, for outdoor weather-exposed applications. The termination assembly consists of a skirted insulator, high dielectric constant (Hi-K) stress control tube, comfortable Hi-K stress controlling compound and built-in silicone top seal. The insulator is made of a new dark gray silicone rubber with improved tracking resistance and hydrophobic characteristics.

The complete assembly is prestretched and loaded onto a removable recyclable core. The kits are designed for terminating solid dielectric shielded power cable rated 5 kV through 35 kV, with Tape Shielded, Wire Over Tape Shielded and LC Shielded constructions.

Meets requirements of IEEE Standard 48-1996 for Class 1 terminations. Each kit makes one single-phase terminations.

3M Cold Shrink 5610A Series termination kits provide an environmental seal to the terminal lug area of 5 kV and 8 kV nonshielded power cables. Kits can be used for both indoor (protected) and outdoor (weather exposed) applications.

The silicone rubber provides tracking protection for the lug ends of the cable.

Each kit contains everything needed (except terminal lug) to seal three cable ends.

The 3M Cold Shrink QT-II 5671 and 5672 kits are one-piece, 5 kV to 15 kV, Class 3 terminations. They will terminate CN or JCN cables. A Hi-K (high-dielectric constant) stress control tube insulated with a track-resistant silicone rubber tube are prestretched together onto a removable recyclable core.

Meets requirements of IEEE Standard 48-1990 for Class 1 Terminations. Each kit makes one termination.

The 3M Cold Shrink QT-II 5800-Pb silicone rubber termination kits are designed for oil/paper insulated power cable. The 5800-Pb consists of a Hi-K stress control tube insulated with a molded silicone skirted insulator. There is a four-skirt design 15 kV and a six-skirt design rated 25/28 kV.

Each insulator design incorporates an extended based feature which, when combined with mastic, ensures a seal at the cable jacket end where the ground is brought out.

NOTE: A sealed lug, capable of withstanding PILC oil pressure must be used with 5800-Pb series terminations.

Meets requirements of IEEE Standard 48-1990 for Class 1 Terminations. Each kit makes one termination.

The 3M Cold Shrink QT-II 4604 and 4605 Silicone Rubber Kits are three-piece cold shrink terminations for Tape Shielded, Wire Shielded and LC Shielded power cables. They can be used in both protected and weather-exposed contaminated areas.

Meets requirements of IEEE Standard 48-1990 for Class 1 Termination.Each kit makes one termination.